Motorola Series Switch WS5100 - Manual (Page 82)

4-8 WS5100 Series Switch System Reference Guide
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel to close the dialog without committing updates to the running configuration.
4.2.3 Viewing Address Resolution
The Address Resolution table displays the mapping of layer three (IP) addresses to layer two (MAC)
addresses. To view the details of the tab:
1. Select Network > Internet Protocol from the main tree menu.
2. Select the Address Resolution tab.
3. Refer to the Address Resolution table for the following information:
4. Click the Clear button to remove the selected AP entry if no longer usable.
Interface Displays the name of the actual interface on which the IP address was found
(typically a VLAN).
IP Address Displays the IP address being resolved.
MAC Address Displays the MAC address that correspond to the IP address being resolved.
Type Defines whether the entry was added statically or created dynamically due to network
traffic. Entries are typically static.