Multi-Tech Systems MULTIVOIP MVP210/410/810 - Manual (Page 103)

Chapter 6: Using the Software
Multi-Tech Systems, Inc. 103
System Information screen
This screen presents system information at a glance. It is found under the Configuration section and its primary
use is in troubleshooting. The information presented in figure 6-1 is for reference only and is not meant to be an
exact match of your system.
Figure 6-1: System information
System Information Parameter Definitions
Field Name Values Description
Boot Version nn.nn
alpha-
numeric Indicates the version of the code that is used at the startup (booting) of the VOIP.
The boot code version is independent of the software version.
Firmware Version nn.nn.nn
alpha-
numeric Indicates the version of the MultiVOIP firmware.
Configuration Version nn.nn.
nn.nn
alpha-
numeric
Indicates the version of the MultiVOIP configuration software.
Phone Book Version nn.nn
alpha-
numeric Indicates the version of the MultiVOIP phone book being used.
IFM Version nn
alpha-
numeric Indicates version of the IFM module, the device that performs the transformation
between telephony signals and IP signals.
Mac Address numeric Denotes the number assigned as the VOIP unit’s unique Ethernet address.
Up Time days:
hours:
mm:ss Indicates how long the VOIP has been running since its last booting.
Hardware ID alpha-
numeric Indicates version of the MultiVOIP circuit board assembly being used.