Motorola simplefi - Manual (Page 81)

1 F rom the Windows S t a rt menu, select S e t t i n g s >
C o n t rol Panel .
2 Double-click on the Display icon.
3 Click on the S e t t i n g s t a b .
4 Choose more than 256 colors.
5 Click O K .
Re-insert the SimpleWare CD to launch the installer.
The light on wireless adapter is not green
A green light indicates a working adapter. Check the following:
• E n s u re the Wi reless Adapter is plugged into a USB port on
your PC.
• E n s u re the Wi reless USB Network Adapter is enabled.
• E n s u re your PC supports USB ports. For more information,
contact your PC vendor.
If the light on your wireless adapter is dark, install your wireless
adapter software. For help on installing the driver software, see
Section 3, Installation.
If the light on your wireless adapter is orange, your wireless
adapter may be disabled (Windows 2000 users only) or you
need to install your wireless adapter driver software. For help
on installing the driver software, see Section 3, Installation.
To re-enable your wireless adapter (Windows 2000 users only):
1 F rom the Windows S t a rt menu, select Settings >
C o n t rol Panel .
2 Double-click on the Network and Dial-Up Connections
i c o n .
3 If your wireless adapter is disabled, the icon for the adapter
is de-highlighted.
4 To re-enable the wireless adapter, right-click on the icon and
select
E n a b l e f rom the menu.
A P P E N D I X C T R O U B L E S H O OTING
APPENDIX C, TROUBLESHOOTING 67