MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 56)

56
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Various playback functions
■ Playing still frames
1. Press the PAUSE button during playback.
• The unit will shift into still frame mode. By pressing the
PAUSE button once again, the unit will return to its previ-
ous mode.
• By pressing the Camera number button while the still
frame is displayed, the unit will search for that channel’s
images and immediately display them on-screen.
■ Shuttle viewing
The SHUTTLE ring can be used to adjust playback speed
to varying rates. Playback speed will vary according to how
far the SHUTTLE ring is turned.
1. Press the PAUSE button during playback, and then turn
the SHUTTLE ring.
1
1
2
3
4
5
6
7
2
3
4
5
6
7
Reverse speed search (1MB units)
Reverse speed search (skip 5fields)
Reverse speed search (skip 3fields)
Still frame playback
Forward speed search (skip 3fields)
Forward speed search (skip 5fields)
Forward speed search (1MB units)
The unit will shift to still frame playback mode
when the SHUTTLE ring is returned to its former
position.
■ Shuttle hold
By pressing the PAUSE button during playback (or reverse
playback), the unit will shift into still frame mode. Rotate
the SHUTTLE ring in the desired direction and to the de-
sired search speed, then press the PAUSE button while
holding the SHUTTLE ring to position. Search speed will
be maintained even when the SHUTTLE ring is returned
to its original position.
■ Direct shuttle viewing
Direct shuttle playback can be activated by turning the
SHUTTLE ring during playback or reverse playback.
1. Turn the SHUTTLE ring during playback.
Please refer to the above diagram for the playback speed.
The unit will shift to regular playback mode when
the SHUTTLE ring is returned to its former position.
INFORMATION
When playback images recorded
at different recording intervals, there may be rare
occasions when playback speed differs from the
original recording rate.
■ Frame-by-frame playback
1. Turn the JOG dial in either direction during still frame
playback.
• Turn the JOG dial to the right to move forward one frame
and to the left to move back one frame. Continue turning
the JOG dial to the right for forward playback of consecu-
tive frames and to the left for reverse playback of consecu-
tive frames. Stop turning the dial for still frame viewing.
• During frame-by-frame playback in single-screen display
mode, playback will lag behind rapid JOG dial rotation be-
cause the unit is simultaneously engaged in searching for
images in the displayed channel.
■ Reverse playback
1. Press the REV PLAY button when the unit is not in operation.
• The unit will begin reverse playback.
On the first reverse playback after the power
switch is turned on or after recording, the unit will
start by displaying the last recorded image.
■ Changing playback intervals
When the PLAY or REV PLAY button is pressed while the
unit is in operation, playback will occur at the same inter-
vals as the recorded intervals. Playback intervals can be
changed, when the PLAY or REV PLAY button is pressed
while the unit is in playback or reverse playback operation.
Playback intervals can be confirmed on-screen
by using the single-screen display mode and enter-
ing “2” or “3” in the DISPLAY MODE setting of the
<TIME DATE DISPLAY> menu.
• Playback or reverse playback intervals are increased up
when the PLAY button is pressed, and playback or reverse
playback intervals are slowed down when the REV PLAY
button is pressed.
INFORMATION
This is a convenient function for
slow viewing of recordings with fast movement as
well as fast playback of images captured at long
recording intervals.