Midland Radio P25 - Manual (Page 45)

Syn-Tech III P25 Mobile Radio
OPERATION MANUAL
680-090-2041
Version 5.0
http://www.midlandradio.com
36
4.2.4 Transmitting Digital Individual Calls
Individual calls are addressed to a single unit ID rather than a talk group. This radio is
capable of transmitting both unacknowledged and acknowledged indvidual calls. Most
digital radios are capable of receiving unacknowledged individual calls, but some may
not be able to respond to an acknowledged individual call.
4.2.4.1 Transmitting Unacknowledged Individual Calls
Repeatedly press the
(pound) key until
“INDIVIDUAL:” is
displayed. Enter the unit
ID or press the left soft
key (INDEX) to select
from the address book.
Press the left soft key
(OK) to enter
unacknowledged
individual call mode.
Then press PTT to
initiate an individual call
to the selected unit ID.
If no signal
is received
and PTT is
not pressed
for ten
seconds,
individual
call mode
will time out.
Individual call initiation may be disabled in radio programming.
Press # key
until
“Individual:”
is displayed
Enter unit
ID or press
INDEX.
Press OK to enter
unacknowledged
individual call
mode
Figure 4.36 – Unacknowledged individual call mode