Motorola PTP 400 Series User Manual
Page 91
89
Transmit Modulation Mode:
Current active transmit modulation mode.
Receive Modulation Mode:
Current active receive modulation mode.
Signal Strength Ratio:
The Signal Strength Ratio, is the ratio of the power received by the
Vertical / Horizontal receivers.
Wireless Link Availability:
Expresses the link availability as a percentage of time since the
first successful registration after a system restart. It is expressed as a percentage to four
decimal places.
Code Word Error Ratio:
The ratio of detected codeword errors to the total number of
codewords since the last system counter reset.
PHY Code Word Error Counter:
The wireless link uses error correction techniques to enable
reconstruction of packets where there is a certain level of data corruption. This counter
displays the total number of packets that were so badly corrupted that they could not be
reconstructed. See note 21.
Elapsed Time Indicator:
Elapsed Time Indicator is the time in days, hours, minutes and
seconds since the wireless unit was last rebooted.
Statistics Page Refresh Period:
The statistics page refreshes automatically according to the
setting entered here (in seconds).
The two buttons described below are also displayed:
Reset System Counters:
By pressing this button all counters in the system are reset to zero.
Reset System Histograms:
All histograms are reset, and the calculation period is restarted.