Motorola SYMBOL MINISCAN MSXX04 User Manual
Page 30
2 - 6
Symbol MiniScan MSXX04 Series Integration Guide
4.
Tilt the scanner bracket in the opposite direction to access the rear scanner mounting holes (which are aligned
with the rear inserts on the bottom of the scanner), then insert the remaining two screws provided through the
two rear mounting holes and into the scanner’s threaded inserts.
5.
Secure the mounting bracket to a flat surface by inserting 1/8” or smaller fasteners through the surface and into
the bracket’s mounting holes. There are four mounting holes on the bottom of the mounting bracket for
horizontal mounting, and six holes on the side for vertical mounting.
Figure 2-6
Mounting the Scanner and Bracket
Scanner Bracket
Mounting Bracket
Vertical
Mounting Holes
Horizontal
Mounting Holes
Scanner
Mounting Holes