Motorola F5207A - Manual (Page 16)

16 MW800 CPU Owner’s Manual
Ignition shut down preference
Selects desired CPU action when turning the ignition switch off. The following
options are available:
• NONE Ignore turning the ignition switch off.
• SHUTDOWN Shut the device down when the ignition switch is turned
off. If this option is selected, set Ignition shutdown time-
out, which specifies the period to elapse between turning
off the ignition switch and the CPU shutting down.
Factory setting is NONE.
Ignition shutdown timer
Selects the amount of time to elapse between turning the ignition switch off and CPU
shutting down. This parameter may vary from 0 to 127 seconds or minutes. Factory
setting is 3 minutes.
WLAN adapter switch
Turns internal mini-PCI wireless LAN adapter on and off. Factory setting is ON.
Radio status on power up
Selects the initial state of the internal WAN (GPRS, iDEN or Private DataTAC)
radio. Factory setting is ON.
Main radio power switch
The internal radio is connected to or disconnected from a power source. This
parameter turns the radio power switch on and off. Factory setting is ON.
GPO0 state on power up
Defines initial state of the general-purpose GPO0 output at the auxiliary connection.
Factory setting is OFF.
GPO1 state on power up
Defines initial state of the general-purpose GPO1 output at the auxiliary connection.
Factory setting is OFF.
Auxiliary 5V output
Enables or disables 5VDC output at the auxiliary connection. Factory setting is
ENABLE.
Auxiliary 12V output
Enables or disables the car battery voltage output at the auxiliary connection. Factory
setting is ENABLE.
GPS state on power up