Micron Technology MERIDIAN 850 - Manual (Page 54)

54
Running SETUP
Important:
Before entering SETUP, save your files and exit any applications you
are running. Once you enter SETUP, you will lose all unsaved data
because the system reboots when you exit SETUP.
To run SETUP, press Ctrl+Alt+S either while the system is booting up or
at the DOS prompt.
The SETUP main screen has five menus: Startup, Memory, Disks,
Components, Power, and Exit. You should see a screen similar to the one
above.
Note: SETUP’s bottom panel provides short summaries of the menus and options
currently selected, as well as the keys used for moving and changing values.
Chapter 5 - Using SETUP