Motorola DS3478 - Manual (Page 114)

7 - 16 Symbol DS3478 Product Reference Guide
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select the Low RTS or
High RTS line state.
Beep on <BEL>
Single Point Mode Only
If you enable this parameter, the digital scanner issues a beep when it detects a <BEL> character on the RS-232
serial line. <BEL> indicates an illegal entry or other important event.
*
Host: Low RTS
Host: High RTS
NOTE This parameter is not supported in Multipoint mode.
Beep On <BEL> Character
(Enable)
*
Do Not Beep On <BEL> Character
(Disable)