About digital wireless technology – Mobi Technologies DXR User Manual
Page 7
ABOUT DIGITAL WIRELESS TECHNOLOGY
About 2.4 GHz Digital Wireless Signal
This innovative digital wireless solution integrates advance Frequency Hop-
ping Spread Spectrum (FHSS) technology. This technology greatly reduces the
interference that comes from other devises using the same radio frequency
(2.4 GHz), e.g. WIFI, Bluetooth, cordless phones, etc. However, a weaker signal
(lag or still image) can occur from time to time depending on the environment
where the system is installed.
Factors affecting transmission include microwave ovens or other high frequency
electromagnetic waves. Reinforced concrete walls, large scale metal products
and metal furniture should not be located near the units.
Additionally your wireless router speed can be affected if the units are placed
close to the router. Your signal strenght will return to normal once the units are
placed farther away from the router or once they are turned off.
How to improve your wireless signal quality?
If possible, remove obstacles between the camera and receiver that might af-
fect the signal. These can include furniture, cabinets and walls. If you feel the
wireless signal does not improve, place the montor at a new angle or readjust
its position to make an improvement, or simply place the camera close to the
monitor.
3