Motorola M68HC08 - Manual (Page 21)

System Description
System Specification
DRM028 — Rev 0 Designer Reference Manual
MOTOROLA System Description 21
2.3.2.2 Low-Voltage Evaluation Hardware Set Specification
This hardware set is dedicated for 12 V voltage and very low power
(phase current < 4 A). The specifications for a low-voltage evaluation
hardware and motor set are listed in
Table 2-3 . It is targeted first of all to
software evaluation with small motors.
2.3.2.3 Low-Voltage Hardware Set Specification
This hardware set is dedicated for medium power (phase current < 50 A)
and automotive voltage. The specifications for a low-voltage hardware
and motor set are listed in
Table 2-4 . The hardware power stage board
is dedicated for 12 V, but can be simply configured to a 42 V supply
(described in documentation for the ECLOVACBLDC board). The
supplied motor is targeted for 12 V.
Table 2-3. Low Voltage Evaluation Hardware Set Specifications
Hardware Boards
Characteristics
Input voltage: 12 Vdc
Maximum dc-bus voltage: 16.0 V
Maximal output current: 4.0 A
Motor Characteristics
Motor type:
4 poles, three phase, star
connected, BLDC motor
Speed range: < 5000 rpm (at 60 V)
Maximal line voltage: 60 V
Phase current: 2 A
Output torque: 0.140 Nm (at 2 A)
Drive Characteristics
Speed range: < 1400 rpm
Input voltage: 12 Vdc
Maximum dc-bus voltage: 15.8 V
Protection:
Over-current,
over-voltage, and
under-voltage fault
protection
Load Characteristic Type: Varying
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..