Musical Fidelity A1001 - Manual (Page 4)

Instructions For Use. Page 4
A1001
INSTALLATION
BEFORE YOU SWITCH ON
You should make all connections to the A1001 before switching on.
Follow this routine before you listen for the first time, and each time you
change any connections.
1 Check all the inputs and outputs to the A1001.
2 Then check again.
3 Turn the volume control to nil.
4 Now you can switch on the power and carefully advance the volume to
the level you want and enjoy the music.
INSTALLATION PRECAUTIONS
Your new A1001 is designed and built to provide trouble-free performance but
as with all electronic devices it is necessary to observe a few precautions. Please
ensure that you have complied with these before you connect any AC power to your
amplifier. Retain this guide for future reference.
þ
Heed all warnings on the back of
the unit.
ю ю
Place your A1001 where there is
adequate ventilation.
ю ю
Only connect the unit to a power
supply of the type marked on the back
of the unit.
ю ю
Position the power supply lead
and signal interconnect leads where
they are not likely to be walked on or
trapped by items placed on them.
э э
Do not use near water.
э э Do not place the amplifier near
direct heat sources such as radiators
or other equipment that produces
heat.
э э
Do not remove any covers or try
to gain access to the inside. The war-
ranty will be invalid if the unit has
been tampered with. There are no
user adjustments within. Refer all
service work to an authorised Musical
Fidelity agent.
э э There are fuses in the A1001. In
the unlikely event that one blows, take
your A1001 to your audio dealer. Do
NOT try to replace the fuse yourself
or you will invalidate the warranty.