Marantz SA-7S1 - Manual (Page 11)

6
ENGLISH
FRONT PANEL
z POWER ON/OFF switch
This switch is used to turn the power ON and OFF. When
it is pressed, the display window lights up, and the power
comes on. When it is pressed again, the display window is
extinguished, and the power goes off.
x Disc tray
The disc to be played is placed on the tray.
* Close the tray by pressing the operation button, not by
pressing it in with your hand.
c INV. PHASE (Inverted phase) indicator
This lights when the INV. PHASE button is pressed, and
the phase of the signal from the ANALOG OUTPUTS con-
nector (BALANCED, UNBALANCED) is being inverted.
v INV. PHASE (Inverted phase) button
Press this button to invert the phase of the signal from the
ANALOG OUTPUTS connector (BALANCED, UNBAL-
ANCED). (See page 22)
b SOUND MODE button
Press this button to select the Super Audio CD sound mode.
Super Audio CD (stereo) or Audio CD (if discs are sup-
ported) (See page 14)
n
PAUSE button
Press this button to pause playback. If pressed again, the
unit returns to playback.
m
STOP button
Press this button to stop playback. Also this button is used
to clear all programs.
,
PLAY button
Press this button to start playback.
. Star mark
This turns on when the tray is closed.
This star mark may always remain off for certain settings.
(See page 20)
⁄0 DISPLAY OFF indicator
This indicator turns on when the LCD screen is turned off
(Off mode).
⁄1 OPEN/CLOSE button
Press this button to open the tray. Put on a disk label side
up. Press the button again to close the tray.
⁄2 , (Track Skip/Search buttons)
These buttons can be used as both track skip and track
search buttons. (The buttons on the main unit only.)
: When this button is pressed, the unit goes back
to the beginning of the current track. If the button
is pressed more times, the track being played
is skipped back. When this button is held down,
tracks are searched backward (Fast Rewind).
: Each time this button is pressed, the track being
played is skipped forward. When this button is
held down, tracks are searched forward (Fast
Forward).
In program play, Fast Forward and Fast Rewind can be
done in the playing track only.
⁄3 Remote sensor
The infrared control signal emitted from the remote control
unit are sensed here.
⁄4 EXT. CLOCK (External clock) button
Press this button to match the frequency with the master
clock generator connected to the unit. (See page 21)
⁄5 EXT. CLOCK (External clock) indicator
When the EXT. CLOCK button is pressed, one of the unit’s
clock frequency indicators (44.1 kHz, 88.2 kHz, 176.4 kHz)
turns on.
Every time the EXT. CLOCK button is pressed, the clock
frequency indicator changes. (See page 21)
* When the 44.1kHz, 88.2kHz, and 176.4kHz indicators
are all on at the same time, the internal memory is being
reorganized. This is not a malfunction. Do not switch off
the power during this process.
⁄6 LOCK (lock) indicator
This turns on when the EXT. CLOCK button is pressed,
and the EXT. CLOCK indicator clock frequency and the
master clock generator clock frequency match (synchro-
nize). (See page 21)
⁄7 LCD
This screen shows the operating status.
b
⁄0
z x ⁄7 n ⁄2 ⁄1 m , ⁄4 c v
.
⁄3 ⁄6 ⁄5
NAMES AND FUNCTIONS
06.8.29, 1:51 PM Page 6