iSimple BLUSTREAM ISBT21 - Manual (Page 6)

6
8. Menu - Allows you to adjust settings such as A2DP volume &
microphone volume, search for other Bluetooth devices as well as pair
and remove devices.
Menu Options
Please see your vehicle specific section for menu navigation
1. Settings - Allows you to perform a search for other Bluetooth enabled
devices, adjust the microphone volume & adjust the A2DP volume.
2. Devices - Allows you to see a list of paired devices as well as switch
between paired devices. The device which is active at the time will be
represented with an [A] next to the device name. If there is no active
device at the time there will not be an [A] present.
3. Remove - Allows you to remove paired devices
IMPORTANT NOTE
In order to access the Voicedial, Call History, Call Last # & Menu
functions, the factory radio MUST be in Bluetooth mode. Please see your
vehicle specific section for further details.
Streaming Audio Features
1. A2DP Streaming Audio - Allows you to stream audio wirelessly from
your iPhone. (iPhone MUST have firmware 3.0 or higher. First generation
iPhones do not support A2DP streaming audio)
2. Play/Pause - Allows you to play/pause A2DP audio with the touch of a
button.
IMPORTANT NOTE
When using the ISBT21 in conjunction with an iPod cable on the
GateWay (uPAC), if the iPhone is playing but you do not hear any
sound, check that the output source listed at the bottom of the
iPhone matches the source on the radio. This problem only occurs
when you have the iPhone hooked to the GateWay (uPAC) dock
connector and connected to the ISBT21 simultaneously.