Insignia NS-DV111080F - Manual (Page 5)

Inserting or removing an SD/SDHC card
Your camcorder has 128 MB of internal memory, approximately 70 MB of which is available for
video/photo capture. 70 MB will allow you to capture less than one minute of high defi nition
video or several photos, so it is strongly recommended that you insert an SD/SDHC card for
video/photo capture.
NOTE: When a memory card is inserted, your camcorder automatically stores pictures and movies on the memory
card instead of storing them in the internal memory.
To insert your SD/SDHC card:
1 Power off your camcorder.
2 Open the SD/SDHC card slot cover, then insert
the SD/SDHC card until it clicks into the slot.
3 Close the SD/SDHC card slot cover.
To remove your SD/SDHC card:
1 Power off your camcorder.
2 Open the SD/SDHC card slot cover, then push and release
the SD/SDHC card. The card then pops out of the slot.
3 Remove the card.
4 Close the SD/SDHC card slot cover.
Getting started
To turn on your camcorder:
• Open the LCD monitor 90° or press the Power button
for one second if the LCD monitor is already open but
the camcorder is powered off .
To turn off your camcorder:
• Close the LCD monitor or press the Power button for one second.
Initial settings
When you turn on your camcorder for the fi rst time, your camcorder will be in Simple mode.
Simple mode hides advanced settings and makes your camcorder easier to operate. The default
settings in Simple mode are:
5