Integra DSR-7.3 - Manual (Page 41)

41
Using the Timer Functions
1
Setting the current date and time
5
Start the clock.
Match the date, time etc. then press
ENTER. The display switches back to the
function.
■ Displaying the current time
Press Clock on the remote controller.
If the clock is not set, “ADJUST” flashes. Please set the
clock.
When the power on, press Clock on the remote control to
display current date and time. Press Clock again to return to
the previous display.
When the unit is in standby mode, press Clock on the remote
control to display the current date and time. The display will
disappear after 7 seconds. (Power saving mode)
This manual uses the 24-hour display to
describe how to set the clock. The clock
display may also be switched to a AM/PM
display.
Caution
• In the event of a power outage, or the power cord
being removed from the socket, the clock display
will disappear. Please reset the time again.
• When using the clock functions, make sure that the
power cord is connected to a proper power supply.
« Blinking
«
Display disappears after 7 seconds
Display switches back to the function.
Send
On Standby
Op en/ Clos e
2
T- D Setup IPM
SW Mode Distance
T-D/ ST
A- B
Surround A.Control
-- / ---
Mode
Enter
Repeat
Muting
Up/ Down
SP Setup Test Tone CH Sel
RC- 507M
Audio
Last M Program Random
Late Night Timer
Angle
Clear
Subtitle FM Mode
Input Selector
ENTER
Light
TV
Display
VOL C H
T V In pu t Setu p
DV D Recvr Tape
Tun
Step/ Slow
To p M enu Men u
Retu rn
Clo ck Sle ep
Dimm er
1 2 3
4 5 6
+10 Search 0
7 8 9
Clock Display
Timer
2/3/5/∞
ENTER
Timer
ENTER
Clo
ck
Press Timer repeatedly until
“CLOCK” appears in the display on
the unit, then press ENTER.
Press the cursor buttons ( 5/∞) to
select a day of the week, then press
ENTER.
While the desired day of the week is
flashing, press ENTER.
Days of the week are displayed as follows:
SUN (Sunday) THU (Thursday)
MON (Monday) FRI (Friday)
TUE (Tuesday) SAT (Saturday)
WED (Wednesday)
To switch the clock display 24-hour/
AM/PM, press Display.
Press the cursor buttons ( 5/∞) to
set the time.
Tip
When using the 24 hour display, if you first
press Mode DVD, you can also use the
number buttons to set the time.
2
«
ENTER
ENTER
4
3
ENTER
Display
j
ENTER
«