First use, English 10 – IKEA FWM7 User Manual

Page 10

Advertising
background image

Door Locked indicator

light

The indicator light 3 illuminates when the programme starts

and indicates if the door can be opened:

• light on: the door cannot be opened. The machine is work-

ing or has stopped with water left in the tub.

• light off: the door can be opened. The programme is fin-

ished or the water has been emptied out.

• light blinking: the door is opening in a few minutes.

Delay Start button

The programme can be delayed from 30 min - 60 min - 90

min, 2 hours and then by 1 hour up to a maximum of 20

hours by means of this button.

Display

10.1

10.2

The display shows the following information:

• 10.1

– Child safety lock.

This device permits you to leave the appliance unatten-

ded during it's functioning.

• 10.2

– Duration of the selected programme.

After selecting a programme, the duration is displayed

in hours and minutes (for example

). The duration

is calculated automatically on the basis of the maximum

recommended load for each type of fabric. After the

programme has started, the time remaining is updated

every minute.

– Delayed start.

The Selected delay set by pressing the relevant button

appears on the display for a few seconds, then the du-

ration of the selected programme is displayed again.

The delay time value decreases by one unit every hour

and then, when 1 hour remains, every minute.

– Alarm codes.

In the event of operating problems, some alarm codes

can be displayed, for example

(see paragraph

«What to do if...»).

– Incorrect option selection.

If an option which is not compatible with the set wash

programme is selected, the message Err is displayed at

the bottom of the display for a few seconds and the in-

tegrated red indicator light of button 5 start flashing.

– End of programme.

When the programme has finished the flashing zero (

) is displayed, the indicator light 3 and the indicator

light of button 5 go out and the door can be opened.

First use

• Ensure that the electrical and water

connections comply with the installa-

tion instructions.

• Remove the polystyrene block and

any material from the drum.

ENGLISH

10

Advertising