Intermec EASYCODER PL4 - Manual (Page 59)

EasyCoder PL4 Printer User’s Guide 59
Memory/Communications Specifications (continued)
Optional wireless
communications Bluetooth compatible 2.4 GHz link
Wireless LAN capabilities comply with 802.11b
protocols
Label Specifications
Label/tag width 50.8 mm to 104.1 mm (2 inches to 4.1 inches)
Maximum
label/tag length 508 mm (20 inches) with standard memory
Inter-label gap 2 mm to 4 mm (3 mm preferred)
0.08 inch to 0.16 inch (0.12 inch preferred)
Label thickness 0.064 mm to 0.165 mm (0.0025 inch to 0.0065
inch)
Tag thickness 0.152 mm (0.0060 inch) maximum
Label roll size:
maximum
diameter 66.7 mm (2.625 inch) O.D.
Inner core
diameter 19 mm (0.75 inch) minimum; 35.05 mm (1.38 inch)
minimum diameter for linerless media
Use Intermec-brand direct thermal media that is
outside wound. Media may be reflective (black mark)
sensing or transmissive (gap) sensing, die-cut,
continuous, fanfold, or linerless.
For die-cut labels, use only full auto dies.
Media
requirements The reflective media black marks should extend past
the centerline of the roll.
Minimum Black Mark Dimensions:
Mark width: 12.7mm (0.5 inch) perpendicular to
edge of media, centered within the width of the roll.
Mark length: 2.4 mm (0.094 inch) parallel to edge of
media.