Intel NetStructure MPCBL0001 - Manual (Page 129)

Technical Product Specification 129
Order #273817
Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer
Contents
8.3.9 Remote Access Configuration Submenu
To access this submenu, select Advanced on the menu bar, then Remote Access Configuration.
Table 78 shows remote access configuration options.
Main Advanced Boot Security Exit
CPU Configuration
IDE Configuration
Floppy Configuration
SuperIO Configuration
ACPI Configuration
System Management Configuration
Event Logging Configuration
Fibre Channel Routing (PICMG)
Remote Access Configuration
USB Configuration
PCI Configuration
Table 78. Remote Access Configuration Submenu (Sheet 1 of 2)
Feature Options Description
Remote Access
Disabled
Enabled
Select remote access type.
Serial Port Number COM1 Serial port for console redirection.
Serial Port Mode
115200 8, n,
57600 8, n,
19200 8, n,
9600 8, n, 1
Serial port settings.
Flow Control
None
Hardware
Software
Select flow control for console redirection.
Redirection After BIOS
POST
Disabled
Boot Loader
Always
Select the redirection method after the POST boot loader.
Terminal Type
ANSI
VT 100
VT-UTF8
Select the target terminal type.
Send Carriage Return
Disabled
Enabled Enable this support if the target terminal has more than 80
columns.