Opening the housing, Initial camera setup – Ikelite Underwater TTL Housing for Canon EOS 40D User Manual

Page 6

Advertising
background image

Opening the Housing

Lid Snaps have a Lock. To open,
push Lid Snap Lock forward and lift
as shown. Keep pressure on the Lid
Snap so it does not fly open quickly.

Some Lid Snaps have a lot of spring
tension once they go over center, so
have a firm grip on the Lid Snap. Lid
Snaps may be opened one at a time.

6

Lift

Push Forward

Lid Snap Lock

Initial Camera Setup

-

Insert a fully charged battery.

-

Insert memory card (2GB or greater capacity recommended).

-

Set the mode dial to “M” manual.

-

Set shutter speed to 1/60th second or 1/125th second for fast

moving subjects.

-

Set aperture to F8 for general photography or F22 for macro

photography (close-ups).

-

Set Quality to highest jpeg setting or RAW.

-

Set ISO to 100 and Meter to “center-weighted.”

-

Set Review time to 8 seconds.

-

Set White Balance to Auto “AWB.”

-

Set auto-focus mode to “One Shot.”

-

Set Red-eye On/Off to “OFF.”

-

Set Auto power off to 8 or 15 minutes.

-

Set “Highlight Tone Priority” to “Disable” in camera menu C.FnII:image,
screen #3.

Advertising
This manual is related to the following products: