Initial camera setup – Ikelite DS-50 User Manual
Page 4
Initial Camera Setup
-
Insert a fully charged battery.
-
Insert and format a memory card.
-
Set camera date and time.
-
Set Mode Dial to “Av” Aperture Priority.
-
Set ISO to 80.
-
Raise the camera flash to it’s open or “UP” position.
-
Set Flash to forced “On .”
- In the Flash Settings Menu set Flash Mode to “Auto”, and
Red-Eye Corr. and Red-Eye Lamp to “Off.”
-
Set White Balance to “Auto AWB.”
-
Set Image Quality to “Superfine” and “L.”
-
Set Metering to “Center Weighted Avg.”
-
Set AF-assist Beam to “Off.”
-
Set AF Frame to “Center.”
-
Set AF Mode to “Single.”
-
Set Review to 5 seconds.
-
Set IS Mode to “Shoot Only.”
- In the Power Saving menu, set Auto Power Down to “Off” and Display
Off to “3 min.”
NOTE: Make sure that the camera flash is in the “up” or “raised” position
before closing your housing with the camera inside.
4