InFocus INF5520 User Manual
Page 8
![background image](/manuals/127482/8/background.png)
Page 6
Safety Considerations
Use the power cord provided. Connect the power cord to a receptacle with a protective
safety (earth) ground terminal. A surge-protected power strip is recommended. Do not
overload wall outlets.
It is recommended that the Class 1 tablet be grounded.
Do not install the tablet in places subject to mechanical vibration.
Do not place the tablet on an unstable surface, which could result in serious personal
injuries and tablet damage. When mounting the tablet to a stand, be sure to following the
manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
When disconnecting the power cord, hold the plug, not the cord.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles and the point where they exit from the tablet.
Unplug the tablet if you are not going to use it for an extensive period of time.
Unplug the tablet if you need to clean it with the included microfiber cleaning cloth. The
screen may be wiped with the cleaning cloth when the power is off. Never use alcohol,
solvents or ammonia-based liquids on this product.
Wash hands after handling the cables supplied with this product.
The tablet remote control, mouse and keyboard use batteries. Make sure the batteries’
polarity (+/-) is aligned correctly. Dispose of used batteries in accordance with local
disposal laws.
Only use properly rated wall and stand mounting hardware that meet this product’s
specifications and follow the manufacturer installation instructions. The warranty does
not cover any damage caused by use of improperly rated mounting hardware or from
improper installation.
Refer all service to qualified service personnel. Do not remove the cover or back.
Servicing your own tablet can be dangerous to you and will void the warranty.
Only use replacement parts specified by InFocus. Unauthorized substitutions may result
in fire, electrical shock or injury and may void the warranty.
When mounting the tablet to a wall, metric 8 (12mm) screws must be used. In addition,
the mounting interface should comply with the UL1678 standard in North America. The
mounting means should be strong enough to bear the weight of the monitor
(approximately 114.2 lbs/51.8 kg without the stand).
Follow these instructions to help ensure image quality over the life of the tablet. Failure
to follow these instructions may affect the warranty.
Hg – Lamp contains mercury. Manage in accordance with local disposal
laws. See www.lamprecycle.org.
Lithium Battery (in PC Box) Caution: There is a risk of explosion if the battery is replaced
by an incorrect type. The battery should only be replaced with an identical or equivalent
type of battery as recommended by the manufacturer. Dispose of used batteries in
accordance with local disposal laws.