Propane only, Propane tank ring installation, Left and right cart panel installation – Interlink electronic L485SIB User Manual

Page 18: Transformer/rear cart panel installation

Advertising
background image

18

www.ultrachefgrills.com

Propane Only

4 x N570-0080 (#14 x 1/2”)

3/8”(10mm)

3. Propane Tank Ring Installation

Insert propane tank ring into slots in bottom of shelf as shown. Fold tabs over to secure in place.

4. Left and Right Cart Panel Installation

Install end cart panels ensuring slots in panel are to the top, rest panel on bottom shelf and line up holes. Fasten using
(4) #14 x 1/2” screws.

5. Transformer/Rear Cart Panel Installation

Install the transformer and the power bar onto the rear panel as illustrated using (6) M4 x 8mm screws and (6) M4 lock nuts.
Route the power cord through the rubber grommet in the rear panel.

Fit the rear cart panel between the two end panels; ensure the large holes in the rear panel are to the bottom of cart as
illustrated. Fasten using (6) #14 x 1/2” screws, three on each side.

485RSIB MODEL

Advertising
This manual is related to the following products: