IBM P275 User Manual

Page 20

Advertising
background image

18

US

* If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. A humming noise may be heard, but this is not a

malfunction.

Picture is ghosting

• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.

Picture is not centered or sized
properly

• Set the AUTO (

) function to OK (on) in the SIZE/CENTER menu (page 9).

• Adjust the size or centering (page 9). Note that with some input signals and/or graphics

boards the periphery of the screen is not fully utilized.

Edges of the image are curved

• Adjust the geometry (page 10).

Wavy or elliptical pattern (moire)
is visible

• Adjust the degree of moire cancellation until the moire is minimal (page 11).

xProblems caused by the connected computer or other equipment
• Change your desktop pattern.

Color is not uniform

• Degauss the monitor* (page 11). If you place equipment that generates a magnetic field,

such as a speaker, near the monitor, or if you change the direction the monitor faces, color
may lose uniformity.

• Adjust the landing (page 11).

White does not look white

• Adjust the color temperature (page 12).

Letters and lines show red or blue
shadows at the edges

• Adjust the convergence (page 10).

Monitor buttons do not operate
(

appears on the screen)

• If the control lock is set to ON, set it to OFF (page 14).

COLOR RETURN function does
not operate

• Before using this function, the monitor must be in normal operation mode (green power

indicator on) for at least 30 minutes. For more information on using the COLOR

RETURN (

) function, see page 13.

• Adjust the computer’s power saving settings to keep the monitor in normal operation

mode for more than 30 minutes.

• The monitor may gradually lose its ability to perform this function due to the natural aging

of the picture tube.

A hum is heard right after the
power is turned on

• This is the sound of the auto-degauss cycle. When the power is turned on, the monitor is

automatically degaussed for a few seconds.

Symptom

Check these items

COLOR
RETURN

COLOR

: PRESET

1 6 0 0 x 1 2 0 0 / 8 5 H z

AVA
A F T E R
WARM UP

LABLE

I

Advertising