ICP DAS USA IM-100 - Manual (Page 89)

ol_ReadConfiguration
ntax:
+ 6.0 / Boland C++ Builder 6.0:
le, unsigned
pOnOff, boo ay, unsigned
dConfiguration , ByVal
sStrobeIndex As Integer, ByRef pOnOff A ByRef pPolarity As Boolean, ByRef
uration As Lo
Mavis.IMC_StrobeControl_ReadConfigur mera_Handle, Int32
sStrobeIndex, ref bool pOnOff, ref bool pPolarity, ref Int32 pDelay, ref Int32 pDuration);
Description:
This function reads the current setting of specific Strobe Control. This function is
workable only for the Output Ports that are configured to STROBE_SIGNAL. The
camera needs be initialized with IMC_Camera_Init().
Parameters:
Camera_Handle The handle for MAVIS camera. Use the handle gotten from the
‘pHandle’ parameter of IMC_Camera_Init().
sStrobeIndex The register index of Strobe Control and allows value from 0 ~3.
pOnOff Enable or Disable strobe function. The value can be TRUE for
enable strobe or FALSE for disable strobe.
pPolarity The signal pulse setting for active Strobe Control and pPolarity
can be one of below settings.
STROBE_CONTROL_LOWACTIVE
STROBE_CONTROL_HIGHACTIVE
By default, the polarity of Strobe Control is
STROBE_CONTROL_HIGHACTIVE.
pDelay The delay time of Strobe and the Delay Value range from 0 to
4095. By default, the delay time is setting on 0.
pDuration The Duration Time of Strobe and the Strobe Duration range from
0 to 4095. By default, the duration is setting on 0.
IMC_StrobeContr
Sy
Visual C+
short IMC_StrobeControl_ReadConfiguration (HANDLE Camera_Hand
short sStrobeIndex, bool* l* pPolarity,unsigned long* pDel
long* pDuration);
Visual Basic 6.0
IMC_StrobeControl_Rea (ByVal Camera_Handle As Long
s Boolean,
pDelay As Long, ByRef pD ng) As Integer
C#.NET 2003
ation (IntPtr Ca
- 89 -