Interphase Tech iSpan STM-1 - Manual (Page 4)

interphase.com
1.800.FASTNET
iSPAN 4532 PMC ATM over OC-3c/STM-1 Communications Controller
iSPAN 4532 PMC ATM over OC-3c/STM-1
Communications Controller
Confi guration Options
CONFIGURATION DESCRIPTION
4532-029 Single-mode fi ber
4532-030 Intermediate-range single-mode fi ber
4532-031 Multimode fi ber
4532-032 Single-mode fi ber, JTAG
4532-033 Intermediate-range single-mode fi ber, JTAG
4532-034 Multimode fi ber, JTAG
The following confi gurations have MPC8260A @ 300 MHz, 128 MB SDRAM, and front access ports:
Notes
CONTACT INFORMATION
Web site: www.interphase.com
E-mail: [email protected]
Corporate Headquarters
Parkway Centre 1
2901 N. Dallas Parkway. Suite 200
Plano, Texas 75093
1-800-FASTNET
Phone: + 1.214.654.5000
Fax: + 1.214.654.5500
European Headquarters
Centre d’affaires 10ème Avenue
855, avenue Roger Salengro
92370 Chaville - France
Tél.: + 33 (0) 1 41 15 44 00
Fax: + 33 (0) 1 41 15 12 13
Asia/Pacifi c Rim Headquarters
27 Brallas Avenue
St. Ives NSW 2075
Australia
Tel: +612 9440 2140
Fax: +612 9440 2141
© 2000–2005 Interphase ® , FibreView ® , iWARE ® , iSPAN ® , iNAV ® ,
“Designed to Perform. Designed to Last. ® ”, and the Interphase
logo are registered trademarks, (i)chip™, SynWatch™,
ENTIA™, PowerSAN™, and SlotOptomizer™ are trademarks of
Interphase Corporation
.
All other trademarks are the property of their respective
manufacturers.
Specifi cations and features subject to change without notice.
CONFIGURATION DESCRIPTION
4532-035 Rear Access (requires 3032 PIM)
4532-036 Rear Access (requires 3032 PIM), JTAG
The following confi gurations have MPC8260A @ 300 MHz, 128 MB SDRAM, and rear access ports (requires
3032 PIM):
CONFIGURATION DESCRIPTION
3032-000 Long-range single-mode fi ber
3032-001 Intermediate-range single-mode fi ber
3032-002 Short-range multimode fi ber
The following confi gurations are PCI Interface Modules (PIMs):