Invacare Compressor - Manual (Page 16)

SECTION 3—INITIAL SETUP
HomeFill ® Compressor 16 Part No 1100873
SECTION 3—INITIAL SETUP
NOTE: Dealers Only ‐ Refer to Dealer Information on page 9 before
performing this procedure.
Initial Set Up of Compressor
Compressor Initial Setup Checklist
Before operating the HomeFill Compressor for the first time,
complete the following checklist:
❑ Choose a location for the compressor.
❑ Transport the compressor to the desired location.
❑ Connect the power cord to the compressor.
❑ Connect the compressor to the concentrator.
Choosing a location
The compressor should be at least three inches away from walls,
draperies or furniture to ensure sufficient air flow.
Avoid placing the compressor next to heaters, radiators or hot air
registers.
DO NOT use in a closet.
The compressor should sit on a hard flat stable surface, such as a
table or the Ready Rack.
ƽ WARNING
NEVER use near any type of flame or flammable/explosive
substances, vapors or atmosphere.