Invacare 1143248 User Manual

Safety summary, Installing the arm pad and strap

Advertising
background image

Part No 1143248

1

21” Arm Pad for Walker Platform Attachment

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

21” Arm Pad for Walker Platform Attachment

Model Nos. 1073913

NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact 
carrier/dealer for further instruction.

Arm pads installed on the Walker Platform Attachment model 6027 may not be suitable 
for all arm sizes. Invacare recommends replacing the existing 17” semi‐adjustable arm 
pad with the 21” fully adjustable arm pad.

Safety Summary

To ensure the safe and proper installation of the walker platform attachment, these 
instructions MUST

 

be followed:

ƽ WARNING

DO NOT install this equipment without first reading and understanding this instruction

sheet. If you are unable to understand the warnings, cautions and instructions, contact a

healthcare professional, dealer or technical personnel if applicable, before attempting

to install this equipment - otherwise, injury or damage may occur.
Ensure that ALL attaching hardware is secure.
Invacare products are specifically designed and manufactured for use in conjunction

with Invacare accessories. Accessories designed by other manufacturers have not

been tested by Invacare and are not recommended for use with Invacare products.

ƽ INSTALLATION WARNING

After ANY adjustments, repair or service and BEFORE use, make sure that all

attaching component parts are secure.

Installing the Arm Pad and Strap

NOTE: For this procedure, refer to FIGURE 1.

1. Remove arm pad and cover.

NOTE: Note the orientation of the existing arm 
strap for installation of the new arm strap.

2. Pull on ring and remove fastening strap 

through the slots in the arm support.

3. Thread the end without the ring of the 

new arm strap through slots in the arm 
support. 

NOTE: Make sure the hook end is facing down 
or the arm strap will not secure properly.
4. Slide the arm pad and cover over the arm 

support.

FIGURE 1 Installing the Arm Pad and Strap

Assembly, Installation and Operating Instructions

SAVE THESE INSTRUCTIONS

Arm

Support

Fastening

Strap

Ring

Slots

NOTE: Arm pad removed for clarity.

Advertising
This manual is related to the following products: