Intermec 6710 - Manual (Page 180)

SECTION 5
"
Software Download
5-20 6710 Access Point User’s Guide
file sdvars set checkpoint 1
file fe ab:
file sdvars set checkpoint 2
file tftp get * ustart29.bin ab:
file sdvars set checkpoint 3
reboot
When the software download is started, you can use SNMP
to query its progress by reading the checkpoint variable. If
the variable has a value of 2, for example, you know that
the access point is trying to execute the tftp get
statement. If the value is 3, you know the script has
completed and the reboot statement was executed.
Terminate
Use Terminate to stop the download process in an access
point. The variable’s format is:
File>
sdvars set terminate <value>
If StartTime is counting down, setting this variable stops
the timer, halting the software download process.
Use caution with this variable. If the script file is being
downloaded, or the commands in the script file are being
executed, setting this variable interrupts the processing at
its current location, halting the software download process.
This can leave the access point in an unknown state.
It is your responsibility to determine this state and take
any corrective action necessary. If the NextPowerUpTime
variable is counting down, setting this variable stops the
timer, halting the reboot process.