Intel SBX44 - Manual (Page 11)

Intel® Server Compute Blade SBX44 / Intel® Server Chassis SBCE Peripherals
Revision 2.1 11
5. Peripherals
Peripheral compatibility and stress testing will only be performed with the latest version of an
operating system at the time the validation testing occurred. The following table shows the
operating system and base configurations used to validate each device.
Note that none of these items will be fully qualified. As such, Intel cannot guarantee their
functionality.
The following notation is used in the peripherals table below to indicate the support level that
Intel provides for a particular peripheral under a particular operating system:
Number (i.e. 1)
This peripheral has been tested and is supported under the specific configuration
identified in the Base System Configurations Table in Section 2 of this document.
Number in brackets (i.e. [1])
This peripheral has been tested, but is NOT supported under the specific
configuration identified in the Base System Configurations Table in Section 2 of this
document.
NT
This peripheral has not been tested under this operating system and is not supported
under this operating system.
ND
This peripheral has not been tested under this operating system due to limitations in
IHV driver availability, and is not suported under this operating system.
If there are installation guidelines affecting a particular peripheral and operating system
combination, these are referenced in the following table.