InStep 11-EZ256 - Manual (Page 2)

2
IMPORTANT
Tires are shipped deflated, DO NOT OVERINFLATE. Please inflate slowly, with short bursts, to 20-25 PSI
maximum. 25 PSI will provide a comfortable ride for your child.
We appreciate your purchase of one of our many fine products.We are sure that you will be satisfied with
your selection.We regret that although great care and effort have been taken, occasionally problems
may occur. PLEASE DO NOT RETURN PRODUCT TO THE STORE.To ensure prompt and correct
handling of problems, or to answer questions, please contact us at either our Toll-Free Customer Service
Number or E-mail us at our number listed below. Service will be quicker if you have your model number
(found on the product and box) along with this instruction sheet ready when calling. If you have any questions
concerning the safe use of this product, Please contact us 1-800-242-6110 press “1” for customer service
and then “2 “to speak to a representative or E-mail us at [email protected] or visit our web site at
www.instep.net.
EZStrider Assembly Instructions
Parts List
Description Qty. Description Qty.
Frame Assembly w/seat, Rear Wheel Assembly w/nuts 2
canopy, basket and wrist strap 1 Front Fender 1
Front Wheel Assembly w/nuts #8 – 1 1 ⁄
2
" Phillips head screws 2 (Double
and tab washers 1 has 4)
Tools Required
Phillips screw driver
Adjustable wrench
Stroller Assembly Instructions
Step 1. Unfold Stroller
Grasp handle with one hand, and pull up on the front axle mount with your other hand. Lock both plastic latches onto the lower
frame (Figures A1 and A2).
A1 A2
Latches Seat
Back
Rest
Front
Fork
Latches
Front
Fork
Handle