iRiver iMP-350 - Manual (Page 35)

4
!
- 34 -
?
Should any problem persist after you have checked these
symptoms, consult your iRiver dealer.
No Power On
"No DISC" displayed in LCD
No Sound or noise is heard
Check whether the batteries have been inserted
in proper polarity.
Check whether the HOLD switch in player or
remote is ON (Switch to OFF position)
Check whether the player lid is opened.
Check whether the rechargeable batteries are
not charged.
Check whether CD is inserted.
Check whether the CD is dirty or defective (clean
it or change to new CD).
Check whether the CD is inserted with the label
side up.
Check whether defects are attached in optical
lens (remove the dirt with soft cloth).
Check whether moisture condensation has
occurred (leave the CD player aside for several
hours until the moisture evaporates).
Message may occur due to the characteristic
deviation between CD-RW recorder and CD-
R/RW disc (burn the disc with low speed).
Use packet write disc with full formatting done.
Check whether VOLUME is set to "0". Connect
the earphones/remote plug firmly.
Check whether plug is dirty. Clean the plug with a
dry and soft cloth.
Corrupted MP3, WMA file may have a static
noise or sound cut off.
Continuous and excessive shock may keep the
MP3, WMA and audio CD disc from proper
playback.
Trouble Shooting