I.R.I.S. DC1100 - Manual (Page 23)

Coaxial Networks, Inc. Page 23 of 60
The Web interface can be used to configure the following parameters
1. TCP/IP parameters
2. IRIS Operational mode
3. Web login password
4. Cable modem subscription
5. Cable modem tftp configuration file generation for QOS
6. Downstream channel, QAM mode and Output power level
7. Upstream frequency for each channel
8. Report cable modem status
Configuring TCP/IP parameters
To configure TCP/IP parameter for IRIS or to set its operational mode click on the “Network” on
the left hand side navigational menu. Once selected the IRIS Network Setup screen appears on
the right hand side as shown in Figure 10.
Figure 10 IRIS Configuration Page