Intel 520T - Manual (Page 4)

2
Install Intel Device
View
4
Step1: Choose which version. If you want to
manage from any PC on the network, install the
Web version of Intel Device View. If you manage
from one location, install the Windows version of
Intel Device View.
• To install, place the Intel Device View CD in
the computer’s CD-ROM drive. Select the
Windows* or Web version and follow the on-
screen instructions in the Intel Device View
Installation wizard.
• To run Intel Device View, you must be using
the following versions of software.
Intel Device View Windows 95 or 98
(Windows) Windows NT* 4.0
Intel Device Browser Internet Explorer
View (Web) 4.0 or later
OS Windows NT 4.0,
Windows 95 or 98
Web IIS 3.0 or later
Server Peer Web Server
Netscape Enterprise
Web Server 3.0.
or later
• After installing the Windows version of
Device View, the program will automatically
restart (if necessary) and launch the Device
Wizard. Follow the on-screen instructions.
• If you chose the Web version of Device View,
double-click the Intel Device View icon to
run the program. Look under Unconfigured
Devices in the SNMP Device Tree for the
MAC address of the new switch. Or click the
Install Device icon and wait for the MAC
addresses to appear.
• Double-click the MAC address to assign an
IP address. If you add additional switches,
double-click their MAC addresses to
configure them.
Intel ® Device View
(optional)
Step 3: Assign an IP address. Type the IP
address and subnet mask of the new switch.
Step 2: Find the Device. Double-click the
MAC address of the new switch in the device
tree.
English