Invacare 3600XL - Manual (Page 28)

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Side Entry Whirlpool Tub 28 Part No 1118387
SECTION 4—SAFETY INSPECTION/
TROUBLESHOOTING
NOTE: Every six months or as necessary have a qualified technician perform a thorough inspection
and servicing. Routine maintenance will extend the life and efficiency of your tub.
Safety Inspection Checklists
Initially
 Ensure that the maximum water supply temperature does not exceed 115° F.
 Ensure that the maximum water pressure does not exceed 65 PSI.
 Verify the water flow temperature with a separate thermometer.
 Visually inspect for cracks in the tub surface.
 Ensure that the door handle locks the door closed.
 Ensure that the safety pin properly engages the door.
 Check that all labels are present and legible. Replace if necessary.
Before Each Use
 Disinfect the tub.
 Ensure that the maximum water supply temperature does not exceed 115° F.
 Ensure that the maximum water pressure does not exceed 65 PSI.
 Visually inspect for cracks in the tub surface.
 Ensure that the door handle locks the door closed.
 Ensure that the safety pin properly engages the door.
Every 80-150 Baths
 Perform the heavy duty cleaning procedure on the tub. Refer to Heavy Duty Cleaning
Procedure on page 30.
Every Six Months
 Verify the water flow temperature with a separate thermometer.
 Check that all labels are present and legible. Replace if necessary.
 Clean RADA valve to remove lime deposits.