Iomega 100D User Manual
Page 6
6
Click on the
IP Settings button.
Configure the IP Settings of the Iomega NAS to
match your network, then click the
Apply button.
The Iomega NAS is configured by default to act as
a wireless access point. If you wish to connect to
the Iomega NAS from wireless clients and do not
already have a wireless access point, no change is
necessary; however, you will need to connect the
antenna to the Iomega NAS.
Make any other desired configuration changes. See the user’s manual on the Solutions CD or the
help system for more information on Iomega NAS 100d configuration options.
If you already have a wireless access point or
do not wish to allow wireless clients to connect
to the NAS, click on the
Wireless tab, deselect
the
Wireless check box, and then click the Apply
button.