Intel Peavey ReValver MK III - Manual (Page 15)

Module name = Fox ACS-45
Description = This amp has three channels, all running at the same time; a Normal, Brilliant and
Tremolo channel. The Tone controls (Bass & Treble) only work on the Brilliant channel. The Tone
Cut control removes some high treble (on all channels), and works like a reversed presence
control.
Module name = HomeBrew SE-1
Description = The HomeBrew SE-1 is a low-wattage, single ended amp with two channels. For a
low-wattage circuit it has as many as 3 triode stages for gain. The amp has 2 channels, Clean/Dist.
Module name = The MatchBox
Description = The MatchBox is designed to provide clean to overdriven amplification with a
min imum of clipping. It has as many as 4 gain stages with considerable attenuation between
stages. It has a power amp in a push-pull configuration but no negative feedback (NFB). The
sound is fitti ng for both Guitar and bass. This amp uses a very special tube configuration that gives
you an extra bright sound. For additional distortion, please try any of the distortion stomp boxes
in front of the amp.
14