Intel Fujitsu P8010 - Manual (Page 68)

67 - Lithium ion Battery
Swapping Batteries when another Power Source is available
To swap batteries in your battery bay when you have an additional power source (such as an AC Adapter
or charged modular battery), follow these easy steps:
1 Plug in an AC Adapter or install a fully charged modular battery in the Flexible Bay to ensure power is supplied
to the system.
2 Slide and hold the battery release latches to open the bay.
3 Remove the battery from the bay.
4 Slide the new battery into the bay.
I F THE L ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED , YOU MAY NOT BE ABLE TO USE YOUR
NOTEBOOK OR CHARGE YOUR BATTERY .