Integra DTR-7.6/6.6 - Manual (Page 16)

16
Remote Controller —Continued
HDD mode is for controlling Integra’s next generation
HDD-compatible components. As of 2005, it can be used
with the Onkyo DS-A1 Remote Interactive Dock and
Apple iPod connected via
.
When Using the Onkyo DS-A1:
• Connect the DS-A1 to the TAPE IN or VIDEO 3 IN
jacks.
• Set the DS-A1’s RI MODE switch to HDD.
• Set the AV receiver’s input display to HDD (see
page 44).
• Refer to the DS-A1’s instruction manual.
A Standby button
Turns off the HDD-compatible component.
B On button*
Turns on the HDD-compatible component.
C Arrow [ ]/[ ] and Enter buttons*
Used to navigate menus and select items.
D Album +/– button*
Selects the next or previous album.
E Display button*
Turns on the backlight for 30 seconds.
F Previous [ ] button
Restarts the current song. Press it twice to select the
previous song.
G Pause [ ] button
Pauses playback. (With 3rd generation iPods, it
works as a Play/Pause button.)
H Rewind [ ] button
Press and hold to rewind.
I Playlist [ ]/[ ] buttons*
Used to select the previous or next playlist on the
HDD-compatible component.
J Repeat button*
Used with the repeat function.
K Menu button*
Used to access menus.
L Play [ ] button
Starts playback. If the component is off, it will turn
on automatically. (With 3rd generation iPods, this
button works as a Play/Pause button.)
M Next [ ] button
Selects the next song.
N Stop [ ] button
Stops playback and displays a menu.
O Fast Forward [ ] button
Press and hold to fast forward.
P Random button*
Used with the shuffle function.
* Buttons marked with an asterisk (*) are not supported by
3rd generation iPods.
HDD Mode
B
M F
5
C
D
A
O
N
P
G
8
9
J
HDD
L
K