Invacare 1144492 User Manual

Safety summary, Removing/installing handrims with rivnuts, Natural-fit handrims

Advertising
background image

Part No. 1144492

1

Natural-Fit Handrims

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

Natural-Fit Handrims

NOTE: Check all parts for shipping damage. In case of shipping damage, DO NOT use. Contact 
Invacare for further instruction.

NOTE: This instruction sheet applies to the following Natural‐Fit Handrim Kits:

Safety Summary

To ensure the safe and proper installation of the handrims, these instructions MUST

 

be 

followed:

ƽ WARNING

DO NOT install this equipment without first reading and understanding this

instruction sheet. If you are unable to understand the warnings, cautions and

instructions, contact Invacare, before attempting to install this equipment -

otherwise, injury or damage may occur.

ƽ ACCESSORIES WARNING

Invacare products are specifically designed and manufactured for use in conjunction

with Invacare accessories. Accessories designed by other manufacturers have not

been tested by Invacare and are not recommended for use with Invacare products.

ƽ INSTALLATION WARNING

This procedure MUST be performed by a qualified technician.
After any adjustments, repair or service and before use, make sure that all attaching

component parts are secure.
Proper installation is critical to the performance of the handrim.

Removing/Installing Handrims with Rivnuts

®

NOTE: For this procedure, refer to FIGURE 1 on page 2.

Tool Needed: 

• Screwdriver

1. Remove the wheel from the wheelchair. Refer to the wheelchair owner’s manual.

Assembly and Installation Instructions

1145545

1154546

1145547

1145548

1145549

1145550

1145550

1145552

1145553

1145554

1163646

1163647

1163648

1163649

1163650

1163651

1163652

1163653

Advertising
This manual is related to the following products: