Intermate Twinax Connection LX T-04 - Manual (Page 24)

C o n f i g u r a t i o n
24 U s e r ‘ s G u i d e
Exit the Configuration
Select 'Exit' in the Main Menu.
The following submenu is shown:
==============================================================
SAVE
==============================================================
EDIT CONFIGURATION
_Yes
No
Please remember to set the Device Address on the Address
Switch!
Power off before connecting to the system.
Use <Up><Down> to move, <Enter> to Select
Select 'Yes' to exit the configuration.
The Configuration Utility is terminated and the screen is left blank.
Power off the printer, disconnect the terminal and connect the Intermate LX
T-04 to your IBM system.
If you select 'No' in this submenu the Main Menu is displayed again.
Note: If you exit without saving, the changes you have made to the
configuration are lost when the printer is switched off.