IMC Networks IE-IMCV - Manual (Page 24)

20
Advertise FlowC and Force FlowCtrl - This is the FlowControl feature.
• When using FlowControl functionality on any port, enable Global FlowControl.
Then, configure each port individually.
• When using Auto Negotiation and FlowControl, set Advertise FlowC to Advertise
Flow and set Force FlowCtrl to Flow Auto.
• Set Advertise FlowC to No Flow to disable FlowControl on a given port.
• When using FlowControl and Force Mode on a given port, set Advertise FlowC
to Advertise Flow and set Force FlowCtrl to Frc FlowCt.
Unit FlowControl This enables/disables FlowControl functionality on the unit and
must be enabled for FlowControl to function on any port.
Unit FlowControl displays the following screen: