Impact Products Digital Concrete Test Hammer CN652 - Manual (Page 14)

5.2.2 Clear Memory
Objects cannot be deleted individually.
You can only delete the entire memory contents. This action cannot be
undone after it has been confirmed.
5.2.3 Display Memory
The measurement series number, the impact direction of the concrete test
hammer and the measured rebound values R after deletion of the outliers, as
well as the average of the rebound values or of the compressive strength of
the concrete are displayed.
5.2.4 Output on the Printer
For data transmission, use the printer cable Art. No. 330 00 460. Printing can be
performed on all commercially available printers with a serial port. The following
printing options are available:
- Printer is connected to the display unit during measurement
(online):
After completion of a measurement series (the preselected no. of test impacts
has been performed), the data are sent to the printer. Transmission is also
possible at any time by pressing the PRINT key.
- Printing via memory:
In the sub-menu ”Display memory” the desired measurement series can be
selected with the
keys.
Printing is performed by pressing the PRINT key.
Fig. 5.6 Example of a print protocol
- 12 -