IBM 6274 User Manual
Page 21
Chapter 2. Setting up your computer
7
image on the screen; try them only after you have exhausted other methods of
reducing glare. The following illustrates tilting the monitor.
Dust buildup compounds problems associated with glare. Remember to clean
your display screen periodically using a soft cloth. For smudges and grease, use a
damp cloth and mild detergent (no solvents or abrasives). Always apply liquid to
the cloth first, never directly to the display.
Air circulation
Your computer and monitor produce heat. The computer has two fans that pull in
fresh air and forces out hot air. The monitor lets hot air escape through vents.
Blocking the air vents can cause overheating, which might result in a malfunction
or damage. Place the computer and monitor so that nothing blocks the air vents;
usually, 51 mm (2 in.) of air space is sufficient. Also, make sure the vented air is
not blowing on someone else.
Electrical outlets and cable lengths
The location of electrical outlets and the length of power cords and cables that
connect to the printer and other devices might determine the final placement of
your computer.
When arranging your workspace: