Invacare 1363 - Manual (Page 3)

3 Part No. 1073902 HYGIENIC SHOWER CHAIR
Bottom Leg
Top Leg
Mounting Screw
Flat Washer
Wing Nut
Lock
Washer
FIGURE 3 - ASSEMBLING THE LEGS
ATTACHING LEGS TO THE SEAT
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this
instruction sheet.
WITHOUT BACK (FIGURE 4)
1. Place seat upside down on ground/floor.
2. Align seat legs with seat.
3. Loosely install the four (4) screws through the seat legs and into seat.
4. Once all screws are inserted, torque to 12-15-inch pounds.
5. Refer to ADJUSTING THE LEG EXTENSIONS in this instruction sheet.
WITH BACK (FIGURE 5)
1. Place seat upside down on ground/floor.
2. Align seat legs with seat.
3. Align back support tubes above the seat legs as shown in FIGURE 5.
4. Loosely install the four (4) mounting screws through the back support tubes, seat legs
and into seat.
5. Once all mounting screws are inserted, torque to 12-15-inch pounds.
6. Refer to ADJUSTING LEG EXTENSIONS in this instruction sheet.
FIGURE 4 - ATTACHING LEGS TO THE SEAT - WITHOUT BACK
Seat
Legs
Seat
Mounting Screws