Intel SC5400 - Manual (Page 39)

Intel® Server Chassis SC5400 User’s Guide 21
Installing the Processor and Memory Air Ducts
1. If your system has two processors, remove the inner plastic air baffle from the
inside of the processor air duct (see letter “A” in the following figure).
Caution: This step only applies to systems with two processors. If your server board has only one
processor installed, leave the inner air baffle in place and proceed to step two.
Figure 12. Removing Inner Plastic Air Baffle from Processor Air Duct
2. Install the processor air duct. Make sure the tabs on the processor air duct (see
letters “A” and “B” in the following figure) engage their matching slots on the
chassis before inserting tabs into the chassis slots.
3. Install the memory air duct next by holding the large tab-end of the memory air
duct at a downward angle and then inserting the large tab (see letter “C”) from the
underside into the matching slot on the processor air duct.
AF000323
A