Insignia NS-WBRDVD3 - Manual (Page 11)

7
Wireless 3D Connected Blu-ray Disc Player
www.insigniaproducts.com
Connecting an amplifier with digital optical
audio
To connect an amplifier with digital optical
audio:
1 Connect a video cable (not included) to the
VIDEO OUT jack on the back of your player and
to the VIDEO IN jack on the TV.
2 Connect a digital optical audio cable (not
included) to the OPTICAL DIGITAL OUT jack on
the back of your player and to the OPTICAL
DIGITAL IN jack on the amplifier.
Connecting an amplifier using digital coaxial
audio
To connect an amplifier using digital coaxial
audio:
1 Connect a video cable (not included) to the
VIDEO OUT jack on the back of your player and
to the VIDEO IN jack on the TV.
2 Connect a digital coaxial audio cable (not
included) to the COAXIAL AUDIO OUT jack on
the back of your player and to the COAXIAL
AUDIO IN jack on the amplifier.
Connecting to the Internet
Wired connection
Using a wired network provides the best
performance because the attached devices connect
directly to the network and are not subject to radio
frequency interference.
To connect to the Internet using a wired
connection:
1 Make sure that your player is turned off and the
power cord is unplugged.
2 Connect a network cable to the ETHERNET jack
on the back of your player and into a wired
router using a commercially available LAN or
Ethernet cable.
For instructions on configuring a wired Internet
connection, see “Configuring a wired Internet
connection” on page 21.
Note
You can connect an HDMI cable (not included) to the
HDMI OUT jack on the back of your player and to the
HDMI IN jack on the TV instead of using the VIDEO
OUT jack.
Note
You can connect an HDMI cable (not included) to the
HDMI OUT jack on the back of your player and to the
HDMI IN jack on the TV instead of using the VIDEO
OUT jack.
TV Back of player
Amplifier
Digital optical
audio cable
Video cable
TV Back of player
Amplifier
Video cable
Digital coaxial audio cable
Notes
• When plugging or unplugging the Ethernet
cable, hold the plug portion of the cable.
• When unplugging, do not pull on the Ethernet
cable. While pressing down on the cable lock on
the plug, pull the plug out of the jack.
• Do not connect a modular phone cable to the
ETHERNET jack.
• Connection configurations vary based on the
specifications of your Internet service provider.
Contact your provider for specific instructions
about setting up your wired connection.