iSimple PGHVW1 - Manual (Page 15)

12
9. Selecting AUX
Entering Mode Select Menu
Press the “SAT” button. Press the “CAT FLDR” ▲ or ▼ button to cycle
through the Media Gateway sources until AUX is displayed. Wait 6
seconds and the radio will select the displayed option.
PLEASE NOTE: If you are listening to Satellite Radio and wish to
switch the Media Gateway source, you must press the TUNE KNOB
twice before pressing the
“CAT FLDR” ▲ or ▼ button. If the radio still
does not go into the mode select menu, press and hold the TUNE
KNOB until the radio menu is displayed. Turn the TUNE KNOB until
the radio displays”SELECT SCAN SAT”. Press the preset button
underneath “Channels”. Press and hold the TUNE KNOB to exit
the radio menu. You should now be able to access the mode select
menu.
10. Selecting Factory Satellite
Radio
(if equipped)
Entering Mode Select Menu
Press the “SAT” button. Press the “CAT FLDR” ▲ or ▼ button to cycle
through the Media Gateway sources until SAT is displayed. Wait 6
seconds and the radio will select the displayed option.
PLEASE NOTE: If you are listening to Satellite Radio and wish to
switch the Media Gateway source, you must press the TUNE KNOB
twice before pressing the
“CAT FLDR” ▲ or ▼ button. If the radio still
does not go into the mode select menu, press and hold the TUNE
KNOB until the radio menu is displayed. Turn the TUNE KNOB until
the radio displays”SELECT SCAN SAT”. Press the preset button
underneath “Channels”. Press and hold the TUNE KNOB to exit
the radio menu. You should now be able to access the mode select
menu.
For instructions on the operation of the factory installed Satellite Radio
tuner, please reference the owner’s manual supplied with the vehicle.