JVC RX-7022VSL - Manual (Page 42)

39
2 3 1
5 6 4
8 9 7/P
0 +10 10
EFFECT
TEST
RETURN FM MODE 100+
– SUB WOOFER +
– REAR • R +
– REAR • L +
– CENTER +
MENU
ENTER
Manufacturers’ codes for VCR
Manufacturer Codes
JVC 00*, 26, 27, 28, 29, 58
AIWA 01, 02
BELL & HOWELL 03
BLAUPUNKT 04, 05
CGM 06, 07
EMERSON 08, 10, 11, 12, 64, 65
FISHER 03, 14, 15, 16, 17
FUNAI 01
GE 18, 19, 20
GOLDSTAR 07
GOODMANS 13, 21
GRUNDIG 06, 22
HITACHI 18, 23, 24, 25, 66
LOEWE 07, 21
MAGNAVOX 04, 19, 24
MITSUBISHI 30, 31, 32, 33, 34, 35
NEC 26, 27
NOKIA 03, 36
NORDMENDE 38
ORION 09
PANASONIC 19, 24, 39, 40
PHILIPS 04, 19, 21, 24, 41, 42
PHONOLA 21
RCA/PROSCAN 04, 18, 19, 23, 24, 43, 44,
45
SABA 38, 46
SAMSUNG 45, 47, 59, 61, 62, 63
SANYO 03, 48, 49
SHARP 37, 50
SIEMENS 03, 51
SONY 52, 53, 54
TELEFUNKEN 55, 60
TOSHIBA 43, 44
ZENITH 57
* “00” is the initial setting.
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
Operating Other Manufacturers’ Video Equipment
* “00” is the initial setting.
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
To change the transmittable signals for
operating a DVD player
1 Press and hold AUDIO .
2 Press DVD.
3 Enter manufacturer’s codes using buttons 1 – 9,
and 0.
4 Release AUDIO .
Now, you can use the following buttons on the DVD player after
pressing DVD or DVD MULTI (source selecting button).
3 : Start playback.
7 : Stop playback.
¢ : Skip to the beginning of the next track.
4 : Return to the beginning of the current (or
previous) track.
8 : Pause playback. To release it, press 3.
DVD menu operations
After pressing DVD or DVD MULTI
(source selecting button), you can
use the following buttons for DVD
menu operations:
MENU : Display or erase the menu screen.
5 5 5 5 5/∞ ∞ ∞ ∞ ∞/3 3 3 3 3/2 2 2 2 2 : Select an item on the menu screen.
ENTER : Enter a selected item.
5 Try to operate your DVD player by pressing
AUDIO .
When your DVD player turns on or off, you have entered the
correct codes.
If there are more than one code listed for your brand of DVD
player, try each one until the correct one is entered.
Manufacturers’ codes for DVD player
Manufacturer Codes
JVC 00*, 02
DENON 01
PANASONIC 03
PHILIPS 13
PIONEER 04, 05, 06
RCA 07
SAMSUNG 08
SONY 09
TOSHIBA 10
YAMAHA 11, 12
EN30-42.RX-7020V[A]3 02.4.17, 5:17 PM 39